TEC.MA srl was founded in 1982 and operates at both national and international level.

the maintenance and improvement of product quality, the constant high level of customer support, the dependability of the delivery and the fulfillment of all required standards.

A dynamic organizational structure, the continuous research, the consolidated experience combined with high quality allow you to choose a reliable and timely supplier, who can guarantee strength and continuity to its partners.



It displays consumption and allows remote control by means of its full transparence. Immediate activation. No battery or gas. It can be installed indoors, outdoors, remotely, inversely, under water, in either dangerous or uncomfortable points. It keeps lubrication constant and prevents solid matter accumulation. Lubricant installed reserve, reducing lubrication drawbacks, preventing oversights. It saves production stops and very expensive repairs. Environment friendly: refillable more times, it avoids constant disposal expenses. Fully recyclable. Easy and fast mounting.


The SLOT GREASE Oilers are oilers, which can be used and refilled They preserve the same characteristics, advantages, applications, duration and provisions of the Classic models with all types and grades of oil viscosity.


The peculiarity of the SLOT GREASE® Evo consists in the fact that it can have a single lubricator able to provide all consistencies of NLGI 0-1-2-3-4 grease at any temperature and operating condition without necessity to change the spring.

This is possible thanks to the use of a single spring and to the introduction of an additional adjustment. The first adjustment (A) serves as “substitute for the springs” and it has 3 adjustments, which make reference to the intensity of the grease emission (L=light, M=medium, H=high).

The second adjustment (B) makes reference to the duration expressed in months “1, 3, 6, 12”.

It is sufficient to turn the screw until the desired letter, to set the months on the second screw and the SLOT GREASE® Evo will immediately be able to supply the grease.



Designed and installed everywhere a point to be lubricated is present: bearings, bushings, joints, articulated joints, electric motors, compressors, pumps, valves, reduction units, cranes, mills, ovens, conveyor belts, rolling presses, Archimedean screws, vibrating screens, lifts, elevators, presses, rolling mills, fans, turbines, etc.